RIB's, Aluminum Hard Hull, Rigid Inflatable Boats

Our Rigid Inflatable Boats are made with marine grade aluminum. Our welds are top quality and we guarantee them 5 years or we will replace the boat.

We sell RIB’s sized from 8′ to 16′. Options include a single-skin hull or double hull flat double floor, lockers, seating and consoles. You can easily pull tow toys with any motor – and water-skiers with the two installed D-rings on the transom. All our RIBs have at least three lifting points: one in the bow and two on the transom. RIBs with a bow locker have four lifting points. Due to the very light aluminum hull these boats can go very fast and plane easily with a smaller engine, saving you money on fuel and maintenance, and reducing your carbon footprint. The hull will never have problems of osmosis or gel coat defects. The hull is longer lasting, more durable, and will never absorb water and become heavier with use. The Marine Grade aluminum hull is specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your RIB.

RIBs to 14’ have a 5-layer reinforced high quality PVC material with a thickness of 0.9 mm. RIBs 15’ & 16′ have a 5-layer reinforced high quality PVC material with a thickness of 1.2 mm.  All models are available in CSM Hypatex™ similar to the Hypalon™ material formerly made by DuPont™ with a special design. Hypatex lasts longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. Hypatex is one of the best materials available today. It has been in production for 60 years.  All boats feature a pressure relief valve as standard equipment that will protect your tubes against over pressure when inflated properly (see Construction Information). The air chamber with the pressure relief valve must be inflated first.

With our high level of standard equipment, and our modern European design, Bakerview Boats are world class quality suitable for all kinds of watersports: waterskiing, cruising, SCUBA diving, fishing or as a yacht tender.

ModelDescription
Alu-240Aluminum Hull Inflatable (RIB) 240cm, PVC, 44kg, single floor,
Alu-240DAluminum Hull Inflatable (RIB) 240cm, PVC, 53kg, Double hull,
Alu-240DLAluminum Hull Inflatable (RIB) 240cm, PVC, 61kg, double hull, bow lockers,
Alu-270Aluminum Hull Inflatable (RIB) 270cm, PVC, 51kg, single hull,
Alu-270DAluminum Hull Inflatable (RIB) 270cm, PVC, 61kg, double hull,
Alu-270DLAluminum Hull Inflatable (RIB) 270cm, PVC, 71kg, double hull, bowlockers
Alu300DAluminum Hull Inflatable (RIB) 300cm, PVC, 66kg, double hull
Alu-330DAluminum Hull Inflatable (RIB) 330cm, PVC, 69kg, double hull
Alu-360DLAluminum Hull Inflatable (RIB) 360cm, PVC, 86kg, double hull lockers
Alu-420DLTohatsu 50, Galvanized Trailer
ALU-420HDL, Console, bench, radar bridge, galvanized trailerAluminum Hull Inflatable (RIB) 420cm, CSM Hypalon, 128kg,
Alu-500HDL, Console, Seat, Bench, Galvanized TrailerAluminum Hull Inflatable RIB 500 cm, CSM Hypalon,